In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

Radial effects

 
Mark Douthit Saxophone - David Foster, Elton John, Billy Joel, Michael McDonald, Toto, Vince Gill, Don Henley, Faith Hill, Garth Brooks, Larry Carlton, Keith Urban
"The Voco-Loco is the brains of my pedalboard and definitely makes sure I have control over everything. It's nice to have only one button that does the job of many. Sounds great too!"
  
Search in results
Number of hits 11
RAD-R800 1425 00
VOCO-LOCO Effects Switcher for Voice or Instrument
* Add guitar effects pedals to vocals or instruments
* Create exciting and unique effects as you perform
* Turn on multiple effects using one footswitch
* Works with either dynamic or condenser microphones
 
The Voco-Loco is a foot-controlled effects loop that enables the lead vocalist, sax or trumpet player to incorporate guitar effects pedals into the signal path, just like an electric guitarist adds effects for soloing.
 
The design begins with a state-of-the-art mic preamp that is designed to accept both a standard dynamic microphone or a condenser by activating the built-in phantom power supply. A great sounding two band EQ with low and high frequency shelving makes it easy to add warmth and shimmer. The signal is then sent to the guitar pedals via a transformer isolated hi-Z effects loop circuit that is equipped with individual send & receive controls to optimize signal-to-noise and reduce distortion. A tone control on the return path lets you smooth the sound of pedals that may be overly bright and the blend control lets you mix the original 'dry' signal with the 'wet' effect to set the perfect mix.
 
Simply plug your mic into the Voco-Loco via the XLR input, connect your effects pedals using standard ¼" guitar cables, and then send the output from the Voco-Loco to the input on your mixer. Before the song begins, choose which effects you want on and - when you are ready - activate the loop using the right hand footswitch. A second footswitch serves double-duty as either a mute switch to turn off the mic between sets or as a 100% wet effects loop for special situations where you may not want any of the clean signal to pass through.
 
With the Voco-Loco in your signal chain, you can add delay or reverb, maybe a touch of distortion or even a special effect like a wah-wah to enhance your solo performance. The options are only limited by your imagination and desire to stand out from the crowd!
 
 
RAD-R800 1450 00
PHAZER Class-A Phase Adjuster
* Time align two signals for exceptional clarity
* 100% analogue, does not 'step' like digital delay
* Low-pass filter lets you focus the effect
* Once you try it, you will never mix without

The Radial Phazer™ is an analogue phase alignment tool that lets you bring two sound sources together so that the fundamentals play in sync. Once in phase, the results are impressive: On electric guitar; you can combine the direct feed of an amp with a room mic to create fat rich tones. On a kick drum, combine the 'attack' sound from a batter head mic with the 'boom' captured by the outer shell mic. On a snare drum, combine the top and bottom mics and on acoustic instruments, combine a close 'spot' mic with a room mic to capture textures like never before.
The Phazer is designed from the ground up for optimum sound quality. It employs full-size 100% discreet class-A electronics to deliver the warmth and thickness that is simply not possible with chip based devices. This results in smooth, natural sounding phase curves which are particularly noticeable in the lower frequency spectrum. 0º to 180º phase adjustment is performed with a single knob making it easy to zone-in on the sweet spot. For the more adventurous, a 180° polarity reverse switch accesses the 181° to 360° range and lets you create weird to absurd 'Phazed' tonal textures. This is augmented with a variable low-pass filter that lets you focus the effect in the lower frequency spectrum - where phasing is most audible.
Built Radial tough for the road, the Phazer is equipped with an innovative book-end design that creates a protective zone around the knobs and switches. Construction is 14-gauge steel with an internal I-beam frame that protects the sensitive electronics in even the harshest touring environments. A full bottom no-slip pad provides electrical insulation to eliminate electrical bonding and mechanical isolation to reduce mishap.
The Radial Phazer is a creative tool for the studio designed to expand your tonal palette. Live, it delivers great sound fast. Once you try one, you will never mix without!
RAD-R800 1460 00
PHAZER BANK Same as Phazer in 4 channel 19" rack.
* 100% discrete analogue phase adjustment tool
* Same as Phazer in 4 channel 19" rackmount
* Ideal for phase correcting kick, bass and guitars
* Rackmount version optimized for live touring

The Radial Phazerbank is a 4-channel analogue phase adjustment tool that enables the engineer to effortlessly adjust the phase between two microphones when double mic'ing a single source. Once applied, the result is fatter sounding guitars, a more solid bass, tighter kick and more realistic sounding piano.
The Phazerbank follows the exact design, layout and technical specifications of the popular Phazer, yet it is delivered in a handy 4-channel rack version for live touring. This makes it easy to incorporate into the effects rack and connect via the mixing console channel insert points. Using the Phazerbank is easy: simply turn on the effect, close your eyes and listen.
The Radial Phazerbank... a powerful audio tool made easy.
RAD-R700 0140 00
PHAZEQ Adjustment Tool
* Phase align any two signals for natural tone
* Create exciting radical EQ curves
* 100% discreet analogue with class-A circuitry
* Variable low-pass filter to focus fundamentals

The PhazeQ is a dual function 500-series device. As a phase alignment tool, it is used to time-align two microphones for greater clarity and realism. It also behaves like a very powerful EQ that lets you create exciting new tones that will set your recordings apart.
Designed to work with the Radial Workhorse and other 500 series racks, the PhazeQ features 100% discreet class-A electronics for a warm rich, natural tone. A single control lets you adjust phase shift from 0º to 180º and clever application of a 180ºpolarity reverse extends the range to a full 360º. To further focus the effect on the fundamentals, a low-pass filter may be engaged to remove high frequency content. This is split into two ranges for added precision. The applications are diverse: a close mic and a distant room mic on a guitar amplifier; an XY pair on an acoustic guitar; the batter head and outside of a kick drum; or combining a mic'd bass cabinet with a direct feed. The PhazeQ differs from the original Phazer with the addition of a wet-dry blend control. The PhazeQ 'changes the rules' by taking a single source and splitting the signal to allow you to combine the original sound with the phase shifted signal to deliver an all new type of EQ. It is powerful, radical and will deliver EQ curves like none before.
As a phase adjustment tool, your recordings will attain realism. As an EQ, you will be able to orchestrate tracks like never before. The PhazeQ is powerful tool that will ultimately allow you to expand your creative palette as you enter the new world of analogue phase experimentation. And once you start using it, you will never let go.
RAD-R800 1420 00
EXTC-SA Guitar Effects Interface
* Balanced interface for guitar effects pedals
* Separate send & receive controls optimize signal path
* Transformer isolation helps eliminate ground loops
* Creative tool helps your mix stand out from the rest

The Radial EXTC-SA™ is a stand-alone audio interface that lets you incorporate guitar effects into the realm of pro-audio recording. Just imagine… add a touch of grit to a vocal track, some wah on a kick drum, maybe flange a violin…The EXTC is a creative tool made for your esoteric-inventive side, ready to unleash fresh new sounds that will make your recordings stand out from the crowd.
And it's super easy to use: connect a line level signal from the recording system. The EXTC-SA unbalances the signal and converts it to high impedance where guitar pedals can be inserted at will. Simply plug in, turn the track on, set your levels and adjust the blend for just the right amount of magic. Be prepared for instant amazement. Legalized ecstasy.
Features include Radial's award winning 100% discrete class-A guitar buffering for ultimate audio integrity, transformer isolation to eliminate buzz and hum caused by ground loops, 180º polarity reverse to keep effects and balanced signals in phase, and two loops that can let you compare signal paths or combine them to create your magical masterpiece.
The Radial EXTC-SA is without a doubt one of the most innovative effect manipulating devices ever made. And it opens the door to new sounds by taking Reamping™ technology to an all new level.
The EXTC... be prepared for wild & wonderful!
RAD-R700 0132 00
EXTC 500 Guitar Effects Interface
* Balanced interface for guitar effects pedals
* Separate send & receive controls optimize signal path
* Transformer isolated send eliminates ground loops
* Creative tool helps your mix stand out from the rest

The Radial EXTC™ is a 500 series module that lets you incorporate guitar effects into the realm of pro-audio recording. Just imagine… add a touch of grit to a vocal track, some wah on a kick drum, maybe flange a violin…The EXTC is a creative tool made for your esoteric-inventive side, ready to unleash fresh new sounds that will make your recordings stand out from the crowd.
And it's super easy to use: connect a line level signal from the recording system. The EXTC unbalances the signal and converts it to high impedance where guitar pedals can be inserted at will. Front mounted ¼" send & receive connectors provide easy access. Turn track on, set levels, adjust the blend for just the right amount of magic. Be prepared for instant amazement. Legalized ecstasy.
Features include Radial's award winning 100% discrete class-A guitar buffering for ultimate audio integrity, transformer isolation to eliminate buzz and hum caused by ground loops, 180º polarity reverse to keep effects and balanced signals in phase, plus a separate patch bay insert point to add studio effects into the fun.
The Radial EXTC is without a doubt one of the most innovative effect manipulating devices ever made. And it opens the door to new sounds by taking Reamping™ technology to an all new level.
Be prepared for wild & wonderful!
RAD-R700 0136 00
TANKDRIVER spring reverb interface
* Pro-balanced spring reverb interface
* Use the spring reverb in your guitar amp
* Add unique spring reverb effects to recordings
* Optimized drive circuit for low noise

The Radial Tank Driver is a wonderfully unique 500 series module that allows you to drive a balanced line level signal through the reverb tank in your Fender Twin amp! Yes, an affordable interface designed specifically to drive spring reverbs of all types and deliver the long trailing shimmering effect that is only possible with a true spring.
The design begins with a transformer coupled output driver with normal and high settings for new and old spring reverbs alike. Separate drive and return controls allow signal optimization to maximize signal to noise. To further tailor the tone, the Tank Driver is equipped with two tone controls that let you adjust high end shimmer and low frequency boom. (Let's face it... what else would you call it?)
Plug in an instrument and hear spring reverb with less noise and wider bandwidth than ever before. Plug a mic pre into it to add spring reverb to voice. Try it with drums to create unique sonic spaces. And since you probably have more than one amp in your studio… you will soon be using different reverbs for different tracks.
The Radial Tank Driver… Hachtung Baby!
RAD-R800 7015 00
Tonebone TRI-MODE Tube Distortion Pedal
* Clean, rhythm & lead tones from one pedal
* 12AX7 tube for natural overdrive tone
* Effects loop on solo channel eliminates tap dancing
* Seamless switching for professional results

The Trimode&trade is a high performance tube distortion pedal designed for professional stage use. It combines a proprietary dual-drive gain stage with a 12AX7 tube to deliver the warm tone, feel and dynamics of a real tube amplifier. Turn down your guitar and the Trimode cleans up. Dig into the notes and it reacts to the subtleties of every nuance.
Derived from the popular Tonebone Classic, the Trimode is based on the heritage of America's finest tube amplifiers. The powerful feature set delivers five decades of tone from the slight overdrive of early rock & roll to the blistering power tones of today's modified high gain amps. With this kind of power, you can create tones that will make your voice unique and your individuality shine through.
As the name implies, Trimode has three settings: it begins with a 'True-Bypass clean mode' that delivers the natural tone of your guitar plugged directly to your amp. Hit the footswitch to engage the 'Rhythm mode' where you can adjust the distortion, mid range and output level for the perfect rhythm setting. Toggle to the 'Solo mode' and optimize your sound for sizzling leads that cut through with incredible control and sustain for days. The Trimode goes one step further with a built-in effects loop on the solo channel that lets you instantly engage your delay with a single foot action to deliver a seriously professional stage performance.
The Tonebone Trimode... tremendously versatile, incredibly dynamic, extremely efficient... with the tube warmth and character to let your individuality shine through
RAD-R800 7120 00
Vienna Dual Mode Analog Chorus
* Old school analog bucket brigade chip
* Two programs for quick choral changes
* Turbo mode for extra intense effects
* Standard 9 volt power supply operation

The Bones Vienna Chorus is a dual-mode chorus pedal that mimics the effect of a Leslie rotating speaker by allowing the guitarist to instantly transition between a moderate choral to an intense vibrato with the stomp of a footswitch. This can be particularly useful when switching the chorus between a verse and a bridge to create lush and exciting effects.
Unlike today's common digital chorus pedals, the Vienna is 'old school'. The distinctive warm tone is captured by way of a new-old-stock (NOS) Panasonic MN3007 - circa 1976 bucket brigade chip from the early days of analog delay & chorus pedal development. What makes the Vienna particularly impressive is that unlike older analog chorus pedals that were plagued with noise and hiss, the Vienna is quiet. In fact so quiet it rivals today's digital alternatives. This means that tone aficionados can finally rejoice with the character and feel of a vintage chorus pedal without the noise. Both chorus channels are equipped with individual rate and depth controls for full 2-channel performance. The effect is augmented with 'turbo mode' which introduces a proprietary oscillator waveform frequency while increasing the range. This lets you transition from a slight choral to extreme warble, tremolo or vibrato - opening the door to explore new sonic landscapes.
Optimized for pedalboards, the Vienna is super compact and employs 9V powering to suit the various DC power bricks that are now common with multi-pedal systems. (Power supply is not included). To keep mayhem under control, full size LEDs provide high-visibility status indicators for dark stages. And like all Radial products, the Vienna is built 'tough' with 14 gauge steel and baked enamel finish to handle the rigors of professional touring.
The Vienna Chorus… warm sounding old-school analog chorus in a compact, two channel pedal.
RAD-R800 1430 00
Twin Line Effects loop interface for two amps.
* Shares your pedalboard between two amp loops
* Lets you optimise the signal path for each amp
* Works with pedals or balanced studio processors
* Can be remotely controlled using a footswitch

The Radial Twinline™ is a unique device that enables a guitarist to share effects pedals between two amps when using the amplifier's built-in (rear-panel) effects loops.
Consider the problem: Many guitarists prefer to use the effects loop in the amplifier to insert pedals into their signal chain. This is particularly useful with delay pedals where applying echo to the signal after the guitar amp's preamp distortion as this results in more distinctive notes and more pleasing sonic results. A problem arises when using two amps on stage: how do you toggle the pedalboard between the two amps? The guitar player must either duplicate his pedal setup (one for each amp) or completely change his setup by connecting the pedals to an AB switcher and then connect the pedals to the front panel inputs of the amps.
The Twinline can be thought of as a pedalboard switcher that lets you remotely toggle the effects from one amp's effects loop to the other, thus allowing the guitarist to share his pedalboard between the two amps. To accomplish this, the Twinline is equipped with two amplifier effects loop circuits – each with separate send and receive levels to optimize the signal path for each amp's effects loop. There is also a third effects loop for the pedalboard. This features a choice of unbalanced ¼" connectors for typical guitar pedals or balanced XLR connections for studio effects. A remote control input is used to toggle the active amplifier's effects loop via a contact closure using a MIDI system or latching footswitch. When used with the optional Radial JR2™ remote, this adds the ability to bypass the effects completely.
As with all Radial products, the Twinline is made from heavy duty 14 gauge steel for ultimate durability and maximum shielding against stray magnetic fields while the book-end design creates a protective zone around the controls and switches. Inside, 100% discrete class-A electronics deliver optimal sonics as it buffers the circuit while transformer isolation eliminates troublesome ground loops that can introduce hum and buzz if left unchecked.
The Radial Twinline brings forth a unique solution to a long standing problem.
RAD-R800 1225 00
PHAZER KIT JDX and Phazer in convenient kit
* Combination JDX and Phazer in convenient kit
* Use the JDX to capture the sound of the amp
* Use the Phazer to time-align the signal with the mic
* Foam-filled full surround Zebracase included

The Radial Phazer Kit is designed to deliver the biggest fattest guitar tones ever unleashed upon mankind! Combine the amazing tone from the Radial JDX Reactor with your favorite mic and then phase-align the two signals using the Phazer from Radial Engineering Ltd.
Start by connecting the JDX in between the guitar amp head and speaker cabinet. The JDX's unique reactive load captures both the sound of the head and the back electromagnetic impulse from the loudspeaker. The signal is then processed through a multi-stage filter to replicate the sound of a 4x12 half stack.
Start > Main View > RADIAL > Effects
Ads