In order to give you better service we use cookies. By continuing to browse the site you are agreeing to our use of cookies.

Tonebone Switchers

Radial offering a wide variety of switchers to address various needs such as selecting instruments, switching amplifiers, toggling between two heads using one cabinet or even switching between two cabinets using one head. All of our switchers are hand assembled in Canada using the very best components. With radial... you are switching with the best!

  

Search in results
Number of hits 17
RAD-R800 7080 00
Tonebone SWITCHBONE ABY AMP SELECTOR
* 100% discrete class-A signal path for exceptional audio
*- Exclusive Drag™ control pickup load correction
* Variable power booster with mid control for added cut
* Transformer isolated output to eliminate ground loops
 
The Radial Switchbone ABY is a high performance ABY switcher that is designed to deliver the natural tone and feel of the instrument without introducing noise, distortion or artifact of any kind.
 
The design begins with the same 100% discrete class-A buffering circuit as the critically acclaimed Radial JD7 Injector for exceptional audio performance. Each part is hand inserted into a double sided through-hole PCB for optimal signal transfer. To ensure the natural feel of the instrument is maintained, Drag™ control load correction lets you re-introduce the natural relationship between the guitar pickup and the amp that is invariably lost when the guitar signal is buffered. This also allows longer cable runs of upwards to 15 meters (50') without noise.
 
There are three footswitches on the top panel: The first selects between A or B amps while the second is used to combine amps. To get rid of the pops common to passive switchers, the Switchbone employs photocells that ramp-up the signal for smooth noise-free switching - even when used with high gain amps. To eliminate hum and buzz caused by ground loops, the Switchbone's second output is equipped with a transformer for 100% isolation. To ensure the two amps play in absolute phase, you simply toggle the easy access 180º polarity reverse switch.
 
The third footswitch lets you engage the built-in power booster. This is equipped with a variable level control and is augmented with a 3-position mid-boost switch for extra cut when soloing. The boost function can be bypassed and converted to a mute switch for quiet on-stage tuning. A separate tuner out is always on for quick tune-ups and buffered to keep your signal path clean. Smart 'flashing' LEDs let you know which amp was last selected keeping you in total control at all times.
 
The Switchbone is the most natural sounding ABY amp switcher made today.
 
 
RAD-R800 7210 00
Tonebone BIGSHOT ABY With Leds
  • True-bypass ABY amp selector with LED indicators
  • On-board transformer to eliminate hum & buzz
  • 180° polarity reverse to phase-match amps
  • 100% passive audio path, does not require power

 

The Radial BigShot ABY is a compact ABY switcher that enables you to either switch between two amplifiers or combine the signal when you want both amps to play at the same time.

Designed for the purist, this true-bypass ABY switcher is completely passive meaning that there are no tone altering buffers in between the guitar and the amplifier. With the BigShot ABY, you get the pure tone from your guitar plugged direct into your amp! To add versatility, the BigShot ABY is also equipped with a separate tuner out. This 'always on' output feeds your tuner for constant monitoring while keeping it out of the signal chain. Should you experience hum and buzz problems due to ground loops, the BigShot ABY comes to the rescue with a built-in isolation transformer and ground lift switch. Once engaged, you can toggle the polarity of the second amplifier to ensure both amps play in absolute phase.

In use, the BigShot ABY is both simple to use and efficient on stage. When powered by an external 9V supply or pedalboard power brick, full size super-bright LEDs spring to life to provide instant on-stage amplifier status readout. When power is unavailable, the passive audio signal path still works, unaffected. The compact yet ultra-rugged design makes the BigShot ABY ideal for pedalboards where space is always at a premium.

The BigShot ABY... the most versatile true-bypass switcher made today!

RAD-R800 7078 00
LOOPBONE EFFECTS LOOP CONTROLLER
* Two effects-loops plus SlingShot™ remote
* Class-A circuit for highest quality audio
* Drag™ control pickup load correction
* Adjustable power booster for soloing

The Loopbone is a high-performance effects-loop switcher that enables the guitarist to insert, remove and combine pedals via two independent signal chains while eliminating the tone robbing problems associated with other switchers and the induced noise caused by true-bypass alternatives.
The design begins with Radial's award winning 100% discrete class-A buffer circuit for the very best audio fidelity and lowest noise. This is augmented with Drag Control – a load correction circuit that allows the user to reintroduce the natural tone and feel of the guitar as if connected directly to a tube amplifier. To eliminate 'switch-on' noise, the Loopbone employs photocells that ramp-up and ramp-down the signal for smooth, pop-free performance, even when used with high-gain amplifiers.
Using the Loopbone is easy: plug in your pedals and switch on the loops. The two effects loops are wired in series to enable the first loop to be fed into the second. This enables the guitarist to combine effects to create complex signal paths or take noisy pedals out of the primary signal chain when not in use. For added control, the Loopbone is equipped with Slingshot™, a remote control that can be used to simultaneously change channels on a guitar amp, turn on an effect, or activate another Slingshot equipped pedal like the Radial Headbone. Just imagine... one foot stomp and suddenly, your chorus, delay and overdrive are activated while your amp changes channel! Extras include a built-in power booster with 'set & forget' level control for soloing, plus a separately buffered tuner out for 'on-the-fly' adjustments.
RAD-R800 7082 00
Tonebone HEADBONE VT
* Toggle between two heads using one speaker cabinet
* Control the Headbone with a footswitch remote
* Safe switching for both solid state and tube heads
* Choose from three Headbones to adapt to any setup (VT = Two Valve/Tubes, TS = One Tube & One Solid State, SS = Two Solid State Amps)

The Radial Headbone is a specially designed switching device that lets you toggle between two different guitar amplifier heads using a single speaker cabinet. With the Headbone in your rig, you can use your Marshall head for rhythm and your Mesa-Boogie head for soloing. This is of particular interest for players that demand the utmost in tonal performance when on stage or in the studio.
Features include 100% discrete class-A circuitry for exceptional audio performance, transformer isolated guitar signal path to eliminate ground loops, plus a choice of either buffered or un-buffered inputs to optimize the signal path. The Headbone's internal switching comprises a series of relays, opto-couplers and load resistors, all of which are sequenced via a digitally programmed chip. Hit the footswitch and the Headbone jumps to action as it toggles the guitar signal from one amp to the other, disconnects the speaker and diverts the signal to a load resister, reconnects the speaker to the second head and turns the guitar back on - all in quick succession. The Headbone features SafeMode™ whereby in the event that power is disconnected - the Headbone's guitar input will automatically turn off. To eliminate a mess of cables on stage, the Headbone is equipped with Slingshot – a remote control port that lets you switch the Headbone using any standard footswitch or MIDI controlled contact closure. This eliminates long speaker cables while improving system efficiency.
The Headbone is available in 3 models: The Headbone VT for two valve/tube heads, the Headbone SS for two solid-state heads and the Headbone TS for tube to solid-state amp head switching.
The Headbone – a Radial 'power tool' for serious guitarists.
RAD-R800 7083 00
Tonebone HEADBONE TS
* Toggle between two heads using one speaker cabinet
* Control the Headbone with a footswitch remote
* Safe switching for both solid state and tube heads
* Choose from three Headbones to adapt to any setup (VT = Two Valve/Tubes, TS = One Tube & One Solid State, SS = Two Solid State Amps)

The Radial Headbone is a specially designed switching device that lets you toggle between two different guitar amplifier heads using a single speaker cabinet. With the Headbone in your rig, you can use your Marshall head for rhythm and your Mesa-Boogie head for soloing. This is of particular interest for players that demand the utmost in tonal performance when on stage or in the studio.
Features include 100% discrete class-A circuitry for exceptional audio performance, transformer isolated guitar signal path to eliminate ground loops, plus a choice of either buffered or un-buffered inputs to optimize the signal path. The Headbone's internal switching comprises a series of relays, opto-couplers and load resistors, all of which are sequenced via a digitally programmed chip. Hit the footswitch and the Headbone jumps to action as it toggles the guitar signal from one amp to the other, disconnects the speaker and diverts the signal to a load resister, reconnects the speaker to the second head and turns the guitar back on - all in quick succession. The Headbone features SafeMode™ whereby in the event that power is disconnected - the Headbone's guitar input will automatically turn off. To eliminate a mess of cables on stage, the Headbone is equipped with Slingshot – a remote control port that lets you switch the Headbone using any standard footswitch or MIDI controlled contact closure. This eliminates long speaker cables while improving system efficiency.
The Headbone is available in 3 models: The Headbone VT for two valve/tube heads, the Headbone SS for two solid-state heads and the Headbone TS for tube to solid-state amp head switching.
The Headbone – a Radial 'power tool' for serious guitarists.
RAD-R800 7084 00
Tonebone HEADBONE SS
* Toggle between two heads using one speaker cabinet
* Control the Headbone with a footswitch remote
* Safe switching for both solid state and tube heads
* Choose from three Headbones to adapt to any setup (VT = Two Valve/Tubes, TS = One Tube & One Solid State, SS = Two Solid State Amps)

The Radial Headbone is a specially designed switching device that lets you toggle between two different guitar amplifier heads using a single speaker cabinet. With the Headbone in your rig, you can use your Marshall head for rhythm and your Mesa-Boogie head for soloing. This is of particular interest for players that demand the utmost in tonal performance when on stage or in the studio.
Features include 100% discrete class-A circuitry for exceptional audio performance, transformer isolated guitar signal path to eliminate ground loops, plus a choice of either buffered or un-buffered inputs to optimize the signal path. The Headbone's internal switching comprises a series of relays, opto-couplers and load resistors, all of which are sequenced via a digitally programmed chip. Hit the footswitch and the Headbone jumps to action as it toggles the guitar signal from one amp to the other, disconnects the speaker and diverts the signal to a load resister, reconnects the speaker to the second head and turns the guitar back on - all in quick succession. The Headbone features SafeMode™ whereby in the event that power is disconnected - the Headbone's guitar input will automatically turn off. To eliminate a mess of cables on stage, the Headbone is equipped with Slingshot – a remote control port that lets you switch the Headbone using any standard footswitch or MIDI controlled contact closure. This eliminates long speaker cables while improving system efficiency.
The Headbone is available in 3 models: The Headbone VT for two valve/tube heads, the Headbone SS for two solid-state heads and the Headbone TS for tube to solid-state amp head switching.
The Headbone – a Radial 'power tool' for serious guitarists.
RAD-R800 7115 00
Tonebone Bones Twin City Active ABY Switcher
* Class-A amps switcher with Drag Control
* Isolated output eliminates hum and buzz
* 180° polarity sets both amps in phase
* Standard 9 volt power supply operation

The Twin-City is an active ABY switcher that lets you connect to any two guitar amps and drive them simultaneously without noise, loss of gain or any degradation to your natural guitar tone.
The design begins with Radial's award winning class-A buffer for the most natural tone and Drag Control load correction that lets you reintroduce the natural load on the pickup as if connected directly to a tube amplifier. To eliminate hum and buzz from ground loops, the Twin-City is equipped with an isolation transformer on output B. This is augmented with a ground lift switch and 180° polarity reverse switch that ensures both amplifiers play in phase while noise is reduced to an absolute minimum, even when using older vintage amps. As a buffer, the Twin-City lowers the impedance and susceptibility to noise, making it the ideal signal driver for large stages when using long cable runs.
Like all Radial products, the Twin-City is constructed from heavy 14 gauge steel to protect the internal electronics from abuse when kicked around on a busy stage. For maximum dependability, the Twin-City employs our latest EIS – Electronic Impulse Switching – for unmatched performance without the challenges posed by mechanical switches. Bright, easy to see LEDs provide instant switching status so you know exactly where you are at all times. To better adapt to pedalboards, connections are top mounted for maximum density and powering is done using a standard 9V supply. This makes it easy to combine the Twin-City with other pedals and power them using a power brick .
The Twin-City is a powerful ABY switcher that delivers all of the natural tone, punch and clarity of a true-bypass device without the popping noise of mechanical switches or the induced hum and buzz caused by ground loops.
RAD-R800 7203 00
Tonebone BIGSHOT MIX Wet-Dry Effects Loop
* Lets you mix any effect into your signal path
* Class-A circuit retains natural tone of instrument
* Buffered loop to reduce noise from pedals
* Standard 9V operation for power bricks

The BigShot MIX is an innovative pedal that lets you blend the original sound of your instrument with your effects pedals just like a studio mixer. For example on bass, this lets you add distortion while retaining the natural bottom end that is usually compromised when sending powerful bass frequencies through a pedal.
The MIX begins with 100% discreet, pure class-A circuitry to ensure the natural tone of the instrument is maintained. On the connector panel, a simple effects loop with send and return ¼" jacks make connecting easy. A 'set & forget' recessed MIX control lets you adjust the exact balance between your 'dry' sound and the 'wet' effect so that you can add just a hair of distortion or a full-on grunge attack depending on your mood! This is augmented with a 180° polarity reverse switch that ensures the wet and dry signals are in phase with each other.
Like all Radial pedals the MIX is made road ready with 14 gauge steel construction, dual wafer potentiometers, double sided PC board and a heavy duty footswitch. Simply add a standard Boss-style' 9V supply and you are set to go!
The Radial BigShot MIX... an effects loop that lets you control effects just like a recording console.
RAD-R800 7086 00
Tonebone CABBONE Speaker Cabinet Switcher
* Toggle between two cabinets using one head
* Time overlap safely performs switching
* Remote or local switching capability
* Available in choice of 100W and 300W models

The Radial Cabbone is a unique device that enables you to switch between two speaker cabinets using a single amplifier head. This, for instance, could be used to mount a Fender Twin on a 4x12 Marshall cabinet and switch between the two cabinets to enjoy the very different tonal characteristics of an open-back 2x12 compared to a closed-box 4x12 half stack.
Unlike a regular AB box that mechanically switches between two sources, the Cabbone actually 'ramps on' the switching process with a timed overlap so that the amplifier always sees a speaker load. This ensures both tube and solid state amplifiers are safely switched at all times. The audio signal is actually switched via high-power gold-contact relays to ensure 'straight wire' performance. In other words, the Cabbone will not color the tone or introduce any form of distortion into the signal path. Should power to the Cabbone ever be disconnected, Radial Safe-Mode™ operation automatically resets, connecting the head to output-1.
To reduce 'spaghetti' on stage, the Cabbone is equipped with Slingshot™ - a remotely controlled switching input that enables any standard contact closure to switch cabinets. This lets you keep the Cabbone and speaker cables near the amps and remotely control everything from your pedalboard. With Slingshot, the Cabbone can also switch speakers using a MIDI pedalboard controller, sequencer, or another Slingshot equipped device such as the Loopbone or SW2 remote. Just imagine... with one foot stomp - you could switch channels on your amp, turn on a delay and switch speaker cabinets. Now that's performance!
The Cabbone... a creative tool for making music from the tone fanatics at Radial.
RAD-R800 7200 00
Tonebone BIG SHOT ABY True Bypass Switcher
* True-bypass ABY amp selector with tuner out
* On-board transformer to eliminate hum & buzz
* 180° polarity reverse to phase-match amps
* 100% passive, does not require a battery or power

The Radial BigShot ABY is a compact ABY switcher that enables you to either switch between two amplifiers or combine the signal when you want both amps to play at the same time.
Designed for the purist, this true-bypass ABY switcher is completely passive meaning that there are no tone altering buffers in between the guitar and the amplifier. With the BigShot ABY, you get the pure tone from your guitar plugged direct into your amp! To add versatility, the BigShot ABY is also equipped with a separate tuner out. This 'always on' output feeds your tuner for constant monitoring while keeping it out of the signal chain. Should you experience hum and buzz problems due to ground loops, the BigShot ABY comes to the rescue with a ground lift switch and built-in isolation transformer. Once engaged, you can toggle the polarity of the second amplifier to ensure both amps play in absolute phase.
The compact yet ultra rugged design makes the BigShot ABY ideal for pedalboards where space is always at a premium. Furthermore, because it does not require any power to make it work, it eliminates the need for batteries and space hungry power supplies.
The BigShot ABY... the most versatile true-bypass switcher made today!
RAD-R800 7204 00
Tonebone BIG SHOT EFX Effects Loop Switcher
* Switch between two separate effects loops
* Take noisy pedals out of the signal chain
* Create true-bypass signal path with all pedals
* Compact design does not require any power

The BigShot EFX is a true-bypass effects loop switcher that lets you set up two separate effects loops and insert them into your pedal chain at will. This means that noisy pedals or tone robbing non true-bypass pedals that you 'love to hate' can now be used and completely taken out of the signal path when they are not needed.
Better yet, while effects loop-A is on 'standby' you can turn on and off a series pedals in loop-B to prepare your next sound effect without affecting what is happening live. Then, with one foot stomp a whole chain of pedals can be activated! All of a sudden, your performance becomes seamless and professional - as if you had a custom made switcher. Yes! This is easily done with the BigShot EFX. And because both loops are in series, you can feed one into the other to add even more creative options to your tone.
The compact yet ultra rugged design makes the BigShot EFX ideal for pedalboards where space is always at a premium. Furthermore, because it does not require any power to make it work, it eliminates the need for batteries and space hungry power supplies. You simply plug in and begin to play.
The BigShot EFX opens the door to professional pedal management and lets you do it all right at your feet!
RAD-R800 7220 00
Tonebone BIGSHOT PB1
* Fully variable class-A power booster for solos
* Buffer drives multiple pedals and long cables
* Drag™ control load correction for natural tone
* Ultra linear performance for natural boost

The Radial BigShot PB1 is a combination signal buffer and power booster designed to provide exceptional sonic performance in a compact yet easy to use pedal.
Unlike most buffers that employ integrated circuit chips (ICs) that color the tone and give buffers a bad name, the BigShot PB1 employs the same 100% discrete class-A circuitry that is used in the award winning Radial JD7 Injector and employed by many of the world's most discerning guitarists including Carlos Santana, John Petrucci, Steve Vai, Neil Schon and John Mayer. The JD7's discrete class-A circuit is preferred over off-the-shelf class-B chips due to reduced zero-cross distortion, improved phase response and the resulting smooth Bessel curve that delivers beautifully cascading even-order harmonics and natural warmth. This is augmented with Drag™ Control load correction that lets you adjust the impedance on your pickups and dial-in the tone and feel as if connected directly to your amp.
Upon first view, you will notice that the PB1's top panel is clear of all controls. These have been moved out of the way and recessed on the rear panel so that they can be set and then forgotten. This 'smart solution' makes it impossible to accidentally kick the controls when on a dark stage. You merely use a guitar pick to adjust the Drag™ and then set the boost level for up to +15dB of pure joy. The PB1 is equally effective as a buffer for your effects or for pounding your 20 watt Super Champ into sublime overload. Once in your pedal chain, the PB1 will enable long cable runs of up to 15 meters (50') while reducing susceptibility to noise and interference.
The PB1 may only have a footswitch and status LED on the top – but it delivers more feel and soul than any other power booster in its class. The BigShot PB1 is likely the finest power booster ever made.
RAD-R800 7206 00
Tonebone BIGSHOT SW2 Universal Remote Footswitch
* Remotely control any two amps or effects with one pedal
* Latching or pulse output works with old and new amps
* Link lets you control two devices with one foot-stomp
* Switches other Radial Slingshot™ equipped devices

The BigShot SW2 is a two channel universal remote control that can be used to replace the two amplifier foot switches and combine their main functions with a single pedal. This is ultra cool for pedalboard users that always find themselves short on pedalboard space or need to simplify their setup with a more convenient footswitch.
In order to comply with the 'universal' tag, both latching and pulse outputs are supported enabling the SW2 to control both older amps with contact closure channel switching and newer amps with electronic pulse sensing. These options are augmented by the 'LINK' function that can gang both remote commands onto either foot switch. This could, for instance, switch both amp channels in a stereo rig from a clean rhythm to a distorted lead channel with one single foot stomp. No tap dancing!
For Tonebone pedal users, the SW2 provides a compact Slingshot™ remote switching controller that can be used to remotely switch amp heads using the Headbone or remotely switch speaker cabinets with the Cabbone. When combined with guitar amps, the switching capabilities are huge!
The SW2 – the world's first universal remote switcher!
RAD-R800 7208 00
PZ-SELECT TWO CHANNEL INSTRUMENT SWITCHER
* Switch between piezo and magnetic pickups instantly
* Separate outputs for stage amps and PA system
* Drag control load correction for natural electric tone
* Perfect switcher for those that use electric & acoustic on stage

The Radial PZ-Select is a feature-packed signal switcher designed to work with today's new breed of hybrid electric guitars and basses that employ both magnetic and piezo pickups. It is also perfectly suited for players that need to switch between electric and acoustic instruments and send separate signals to the on-stage amps and PA system.
The design begins with two separate channels: The first is dedicated for electric guitar - the second is optimized for acoustic. Two easy access footswitches allow the artist to effortlessly select between pickups for a seamless performance on stage. The magnetic-electric pickup channel features Radial's award winning class-A buffer for absolute signal integrity. This is augmented with Drag Control (TM) load correction to counter the effect of the buffer for a more natural tone. The piezo-acoustic channel features an ultra-high 10meg-Ohm impedance that at once broadens the frequency response while smoothing out the peaks and edginess that often plagues these transducers. A built-in 3-position high-pass (low cut) filter helps eliminate excessive bottom end which could cause the sound to be muddy and indistinct. When used with an acoustic instrument, the filter works with the 180 deg polarity reverse to help eliminate resonant feedback. A low-pass (high-cut) filter has been included to help warm the sound of active piezo systems that can often sound harsh.
There are two outputs to choose from: A standard ¼" output to feed a stage amp and a built-in Radial DI box to deliver the piezo-acoustic tone direct to the PA system via a low-Z balanced XLR out. A dedicated effects loop on the piezo channel lets you connect a series of pedals to feed both outputs. Selecting channels is simply a matter of depressing the associated footswitch. Bright full-sized LEDs provide visual clarity under stage lights to show the selected channel. Even when off, the signal from both pickups are combined and sent to the dedicated tuner out for quiet on stage adjustments.
The PZ-Select... a powerful switcher that lets you seamlessly select pickups and instruments using the power of your feet!
RAD-R800 1430 00
Twin Line Effects loop interface for two amps.
* Shares your pedalboard between two amp loops
* Lets you optimise the signal path for each amp
* Works with pedals or balanced studio processors
* Can be remotely controlled using a footswitch

The Radial Twinline™ is a unique device that enables a guitarist to share effects pedals between two amps when using the amplifier's built-in (rear-panel) effects loops.
Consider the problem: Many guitarists prefer to use the effects loop in the amplifier to insert pedals into their signal chain. This is particularly useful with delay pedals where applying echo to the signal after the guitar amp's preamp distortion as this results in more distinctive notes and more pleasing sonic results. A problem arises when using two amps on stage: how do you toggle the pedalboard between the two amps? The guitar player must either duplicate his pedal setup (one for each amp) or completely change his setup by connecting the pedals to an AB switcher and then connect the pedals to the front panel inputs of the amps.
The Twinline can be thought of as a pedalboard switcher that lets you remotely toggle the effects from one amp's effects loop to the other, thus allowing the guitarist to share his pedalboard between the two amps. To accomplish this, the Twinline is equipped with two amplifier effects loop circuits – each with separate send and receive levels to optimize the signal path for each amp's effects loop. There is also a third effects loop for the pedalboard. This features a choice of unbalanced ¼" connectors for typical guitar pedals or balanced XLR connections for studio effects. A remote control input is used to toggle the active amplifier's effects loop via a contact closure using a MIDI system or latching footswitch. When used with the optional Radial JR2™ remote, this adds the ability to bypass the effects completely.
As with all Radial products, the Twinline is made from heavy duty 14 gauge steel for ultimate durability and maximum shielding against stray magnetic fields while the book-end design creates a protective zone around the controls and switches. Inside, 100% discrete class-A electronics deliver optimal sonics as it buffers the circuit while transformer isolation eliminates troublesome ground loops that can introduce hum and buzz if left unchecked.
The Radial Twinline brings forth a unique solution to a long standing problem.
RAD-R800 7202 00
Tonebone BIG SHOT I/O
* Toggle two instruments with single foot stomp
* Adjustable volume control to match levels
* Separate tuner output and mute switch
* Load compensation for long cables

The Radial BigShot i/o is an easy to use instrument selector that lets you quickly transition between any two instruments and send the output signal to your amp. Because the i/o is 100% true-bypass, it addresses the needs of the most demanding purist.
To enhance functionality, input-B is equipped with a trim control called DIM that lets you use two different types of instruments and set the levels so that they match. You simply connect the louder of your two instruments into input B and set the level to suit. When passive instruments are used, a unique 'bright' switch lets you compensate for high frequency loss when using longer cables. The BigShot i/o is also equipped with a separate tuner output. With a simple foot stomp, the sound going to the amp is muted and diverted to the tuner for quiet on-stage adjustments.
Super compact, extremely rugged and 100% passive, the BigShot i/o does not require any powering to make it work. This makes it ideal for pedalboards where the use of batteries or power supplies is painful!
The BigShot i/o... the perfect instrument selector for stage use.
RAD-R800 7212 00
Tonebone BIGSHOT I/O With Leds
  • Toggle between two instruments with a single foot stomp
  • Adjustable volume control to match instrument levels
  • Separate tuner output and mute switch with LEDs
  • Load compensation 'bright switch' for long cables

 

 

The Radial BigShot i/o is an easy to use instrument selector that lets you quickly transition between any two instruments and send the output signal to your amp. Because the i/o is 100% true-bypass, it addresses the needs of the most demanding purist.

To enhance functionality, input-B is equipped with a volume control that lets you reduce the input sensitivity of the louder instrument so that the two instrument output levels match. Simply connect the louder of your two instruments to input-B and set the level to suit. When passive instruments are used, a unique 3-position 'bright switch' lets you compensate for high frequency loss. The BigShot i/o is also equipped with a separate tuner output. With a simple foot stomp, the sound going to the amp is muted and diverted to the tuner for quiet on-stage adjustments. Super-bright LED indicators provide instant status for the input select and mute functions.

Compact, extremely rugged and 100% passive, the BigShot i/o does not require any powering to make it work other than for the LEDs. This means that if you forget your power supply or simply do not want to use it, the audio will pass without the LED indicators. This makes it ideal for all types of pedalboards and any size setup!

The BigShot i/o... the perfect instrument selector for stage use.

 

 

 

Start > Main View > TONEBONE > Switchers
Ads